# Future plans for additional CAD software

**URL:** <https://community.quilter.ai/t/future-plans-for-additional-cad-software/282>\
**Category:** Questions\
**Created:** [April 17, 2025, 2:18pm UTC](https://community.quilter.ai/t/future-plans-for-additional-cad-software/282 "2025-04-17T14:18:48Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![yano.xs](https://avatars.discourse-cdn.com/v4/letter/y/f4b2a3/32.png) [@yano.xs](https://community.quilter.ai/u/yano.xs)\
**Post date:** [April 17, 2025, 2:18pm UTC](https://community.quilter.ai/t/future-plans-for-additional-cad-software/282/1 "2025-04-17T14:18:48Z")

</div>

I am very interested in this wiring tool.  
So, my question is, are there any plans to make it possible to use Cadence OrCAD CAD data in the future?

---

<div class="post-metadata">

**Author:** ![will](https://sea2.discourse-cdn.com/flex020/user_avatar/community.quilter.ai/will/32/98_2.png) [@will](https://community.quilter.ai/u/will)\
**Post date:** [April 17, 2025, 2:19pm UTC](https://community.quilter.ai/t/future-plans-for-additional-cad-software/282/2 "2025-04-17T14:19:32Z")

</div>

Yes – Cadence is the next CAD platform that we’re planning to support!

---

<div class="post-metadata">

**Author:** ![mcgiwer](https://sea2.discourse-cdn.com/flex020/user_avatar/community.quilter.ai/mcgiwer/32/110_2.png) [@mcgiwer](https://community.quilter.ai/u/mcgiwer)\
**Post date:** [May 7, 2025, 4:15pm UTC](https://community.quilter.ai/t/future-plans-for-additional-cad-software/282/3 "2025-05-07T16:15:21Z")

</div>

Hello. Do You plan to support EasyEDA ?

In my modest opinion, if Quilter would start cooperation with it then users would get a very powerfull toolset to work with 😉