第一次尝试用quilter来完成一个板子的布局和走线，非常期待他能给我怎样的惊喜；
在等待的过程中，我想了解下，从他的工作逻辑角度上看，除了常规的文件提供之外，我还能做哪些来帮助quilter输出一个尽可能接近我所希望的layout结果；提供足够清楚的定制化的绘制规则（每一颗元器件的作用和摆放位置要求？每一条关键线路的走线或线径要求）？或者是否可以我自行元器件布局，由quilter来完成走线？
Hi,
There are a number of things you can do to make results out of Quilter be better. First, have a look at our docs: Introduction | Quilter
We strongly recommend setting up your own design rules and stackup using our custom stackup workflow. The other thing that is important is controlling the floor-plan. Be sure to use rooms or similar features to structure the major sub-circuits.
You are also welcome to iterate! It’s helpful to use Quilter to place components, download the placed-only version, update placement yourself, and then move on to routing. You are welcome to either do partial placement or fully place boards yourself - and you can even partially route critical signals if you prefer!
Thank you for your answer. I have received the PCB file, but I found some mistakes. How should I set up rules to avoid such problems, including right-angle traces, acute-angle traces, and traces that are not particularly smooth?